Manual Enrollment

NXT, MS and 26-bit Wiegand credentials can be manually enrolled by entering the card's imprint (the number printed on the outside of the card), MS and Wiegand cards also require a facility code. The manual enrollment method is best used when you have a single card to enroll, such as issuing a cardholder a replacement card.

The following section assumes a cardholder name has already been added and saved.

1. Un-check the Calculate Internal Number tick-box.

2. Enter the Imprint number from the credential into the Imprint field. The Imprint number is the set of digits, underlined in red.

3. Click the Status pull-down menu and select a status for the credential.

4. Click the Add Card button. The credential is now entered into the database.

5. Click the icon in the upper-left corner of the window to save the cardholder enrollment.
   

1. Check the Calculate Internal Number option.
2. Select the Keri MS or Wiegand 26-bit credential format from the drop-down menu.

3. Enter the Imprint number from the credential into the Imprint field. The Imprint number is the set of digits, underlined in red.

4. For a 26-bit Wiegand credential, enter the credential's facility code into the Facility Code field.

5. Click the Status pull-down menu and select a status for the credential.

6. Click the Add Card button. The Cardnumber is automatically calculated and the credential is now entered into the database.

7. Click the icon in the upper-left corner of the window to save the cardholder enrollment.

MS Card Enrollment